Vertical Map Packing Machine Map Bag Sealer 3 Gases 3KW Advanced With PLC Control

Vertical Modified Atmosphere Fresh Keeping Sealing Machine 3 Gases

Product Overview:

This machine is a vertical atmosphere-controlled freshness-locking sealing machine developed according to market demand. It can extend the shelf life of food in a low-temperature refrigerated environment without adding any preservatives. It can be vacuumed or filled with fresh-keeping gas. The sealing film can be a roll film or a sheet film, and one of the two can be selected. The box is placed manually, the gas is automatically replaced and sealed, and the box is automatically taken out. It can seal four or more boxes at a time, saving human resources and greatly improving production efficiency.

Non-standard customization::

Our company customizes equipment for customers according to the actual conditions such as the shape and specifications of the packaging tray and the production requirements.

Food packaged in modified atmosphere can better maintain the original taste, color, shape and nutrition of the food, and can achieve a longer shelf life by combining its own food technology.

Applicable packaging::

Fast food lunch boxes, fresh poultry and livestock meat, chilled meat, seafood, cooked food, pickles, etc.

Applicable occasions::

Agricultural and sideline products processing and distribution centers, food processing plants, frozen food plants, meat processing plants, fruit and vegetable processing plants, snack food plants, supermarkets’ fresh agricultural and sideline products back offices, fresh meat chains, food distribution, fast food distribution centers, seasoning processing plants, bakeries, cake shops, Chinese restaurants, Western restaurants, tea restaurants, coffee shops, beverage shops, etc.

Working principle:

Principle of modified atmosphere fresh-keeping packaging: the air in the box is replaced by fresh-keeping gas, and the electrical control system controls the cylinder of the execution system to complete the steps of the lower mold in and out and the mold separation, mold closing, heat sealing, film cutting and film collection with the upper mold.

Put the box → press the switch → the lower mold enters (in place) → the upper mold moves down and closes with the lower mold (in place) → remove natural air → fill with mixed fresh-keeping gas (N2, O2, CO2, etc.) (completed) → seal and cut the film → deflate → separate the upper and lower molds → exit the lower mold, eject the packaged finished product → take out the finished product.

Ordinary sealing principle: upper and lower molds close → seal and cut the film (completed) → exit the lower mold, eject the packaged finished product.

Note: After deflation, the upper and lower molds are reset to complete a working cycle.

Mixing ratio:

According to different food characteristics, gas mixers with different gas types and fixed mixing ratios are provided.

It can also be upgraded to a ternary gas mixer at an additional cost according to demand.

Precautions for Use:

1. Before using this machine, a grounding wire must be connected.

2. Pay attention to safety. Do not insert your hand into the machine when it is in the standby or power-on state.

3. In case of emergency, press the red emergency stop button directly.

4. When installing the sealing film, make sure to turn off the power.

5. If it is the first time to seal, the temperature should be increased gradually from low to high.

6. When placing the machine, make sure the four feet are level first and the ground surface is solid.

7. Regularly add grease to the guide columns to reduce wear on parts.

8. Clean up the hygiene every day, especially on the conveyor belt and the motor.

9. If there is a malfunction, non-professionals are not allowed to open the electrical box. Contact our after-sales service promptly.

Main configuration:

Electronic control and program control:

PLC Mitsubishi

Touch screen Weiluntong

Temperature control Mitsubishi temperature control module

Relay Omron

Pneumatic part:

Cylinder Taiwan AirTac

Solenoid valve Taiwan AirTac

Mixing system: Denmark MOCON

Mold part: Surface sandblasting anodized anti-rust aluminum alloy mold, hot plate sprayed Teflon.

Payment Method:

After the contract is signed, 50% of the total contract amount will be paid as a deposit. The remaining 50% can be paid after the equipment is completed and can be inspected on-site or confirmed by video. After the equipment is inspected and qualified, the payment will be released and the equipment will be delivered.

Delivery Period:

15-20 days

Warranty Policy:

The machine is guaranteed for one year and provides lifetime service.